The AreaCare Plus three layer foam pressure surface offers maximum pressure reduction in a three layer foam surface for higher risk patients. Available in Standard or King Single widths, the three layered, zoned design of this very high risk pressure surface is ideal for patients with poor mobility or uncertain skin sensitivity.
A top layer of high density, temperature sensitive, memory foam conforms to the body’s shape, working in combination with the higher resistance support layer to disperse pressure evenly. The top layer also incorporates a special immersion, slow recovery foam foot zone for the ulcer prone heel area. The core layer and edges provide form, strength and stability. Standard model suitable for users up to 220kg; king single up to 250kg.
excellent support and pressure reduction
three layer, zoned design with hinge to suit profiling bed
multi-density foam layers for maximum strength and comfort; protected by a cotton inner lining
vapour permeable, bacteriostatically treated, fire retardant and water resistant top cover
four way stretch cover material for enhanced anti-shear and anti-friction benefits
waterfall skirt to protect from moisture ingress; welded and taped seams for infection control
Specifications:
Sizes:
single, king single
Firmness:
soft, firm
Height:
18cm
Weight:
20kg
Weight Capacity:
250kg
Features:
Comfort Layers:
5cm
Dynamic Air Support:
no
Memory Foam:
yes
No-Turn Design:
no
Pocket Springs:
no
Pressure Risk:
high
Pressure Sensitive:
yes
Support Edge:
yes
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
Middle of the range, the IC20 proves to be popular choice. The medium feel provides a soft feel but excellent support, and is 8" (20cm) deep. This mattress is heat and pressure sensitive which means that as it gets warmer it becomes softer. So when there is a pressure point developing which usually gets hot and enflamed, this area of the mattress will become softer which allows the blood to flow freely again.
Anticrease XP base to allow easy contour for any profiling bed
Standard cover MVTR: NA. Medical Cover MVTR (g/24h·m2): 1635.0 Average
Medical Cover BS7175: Crib 5
To launder the cover in a washing machine, set the main wash to a minimum of 65°C for no less than 10 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60°C. The foam can be autoclaved at 134°C.
Specifications:
Sizes:
single, long single, king single, double, long double, queen, split queen
Firmness:
medium
Height:
20cm
Weight:
kg
Weight Capacity:
200kg
Waterlow:
≤20
Features:
Comfort Layers:
no
Dynamic Air Support:
no
Memory Foam:
yes
No-Turn Design:
yes
Pocket Springs:
no
Pressure Risk:
high
Pressure Sensitive:
yes
Support Edge:
yes
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
The IC30 Gel-Infused ActiveX™ Mattress with Charcoal and Firm Edge Support is designed to provide comfort, support and pressure care for a good night’s sleep. The gel infusion in the mattress helps to regulate temperature, ensuring a cool and comfortable sleep surface. The addition of charcoal helps to absorb odors and moisture, promoting a clean and hygienic sleeping environment.
ActiveX™ is temperature and pressure sensitive which provides an optimum balance of immersion and envelopment creating a sleep surface with excellent support, comfort and very high level of pressure care.
Anticrease XP base to allow easy contour for any profiling bed
Medical Cover BS7175: Crib 5
Envelopment Score: 4/5
To launder the cover in a washing machine, set the main wash to a minimum of 65°C for no less than 10 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60°C. The foam can be autoclaved at 134°C.
Specifications:
Sizes:
single, long single, king single, double, long double, queen, split queen
Firmness:
medium
Height:
20cm
Weight:
20kg
Weight Capacity:
200kg
Waterlow:
≤20
Features:
Comfort Layers:
yes
Dynamic Air Support:
no
Memory Foam:
yes
No-Turn Design:
yes
Pocket Springs:
no
Pressure Risk:
high
Pressure Sensitive:
yes
Support Edge:
yes
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
The Plush 8" Cool Balance Support mattress is designed to help regulate your body temperature while you sleep with the Cool Gel infused Memory foam. This mattress helps with pressure point relief and is perfect for use with any adjustable bed base. This mattress also boasts firmer edge support to enable side transfers and makes getting out of bed just that little bit easier!
Specifications:
Sizes:
long single, king single, double, long double, queen, split queen
Firmness:
medium-firm
Height:
20cm
Weight:
17.5-26kg
Weight Capacity:
180kg
Features:
Comfort Layers:
5cm
Dynamic Air Support:
no
Memory Foam:
yes
No-Turn Design:
no
Pocket Springs:
no
Pressure Risk:
medium
Pressure Sensitive:
yes
Support Edge:
yes
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
A luxurious pocket spring unit mattress designed for adjustable bases. It features premium Tencel fabric, natural latex comfort layers and a classic pocket spring system to provide excellent support and comfort for a good night sleep.
5 Year Guarantee
Specifications:
Sizes:
long single, king single, long double, queen, split queen
Firmness:
plush, medium, firm
Height:
21cm
Features:
Comfort Layers:
7.6cm
Dynamic Air Support:
no
Memory Foam:
no
No-Turn Design:
no
Pocket Springs:
yes
Pressure Risk:
low
Pressure Sensitive:
yes
Support Edge:
yes
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
The Splendor Supreme features a 5 zone pocket spring unit with 10cm of foam in combination with premium natural latex. This mattress comes as a mattress in a box for easy transportation options as well as being suitable for any adjustable bed.
Price is for mattress only.
Specifications:
Sizes:
long single, king single, long double, queen, split queen
Firmness:
medium-firm, extra-firm
Height:
20cm
Weight Capacity:
220kg
Features:
Comfort Layers:
3cm
Dynamic Air Support:
no
Memory Foam:
no
No-Turn Design:
no
Pocket Springs:
yes
Pressure Risk:
high
Pressure Sensitive:
no
Support Edge:
yes
Temperature Regulation:
no
Works with Adjustable Frames:
yes
The Softform Premier mattress really does provide exceptional pressure reduction and comfort. Equipped with a suite of features that ensures durability, sustained high degree of protection against tissue damage for the patient and an ingeniously designed insert pad.
With sidewall support and non-flip (horizontal rotate only) facility, the mattress reduces the demand for manual handling and makes movement of the mattress easier when in use.
Covered in a PU, vapour permeable, two-way stretch cover that is waterproof and has welded seams, the foam core is protected by a fully enclosed zip. The zip facilitates easy access into the mattress interior for audit inspections.
Deep contoured insert pad for enhanced pressure area care; maximise body contact area and optimises pressure reduction
Top cover is fully detachable; aids inspection and allows easy removal for washing. Also facilitates a cost benefit of allowing the replacement of individual parts rather than the whole mattress
Warranty: foam 8 years, cover 4 years
Specifications:
Sizes:
long single, king single
Firmness:
medium
Height:
15cm
Weight:
16kg
Weight Capacity:
248kg
Features:
Comfort Layers:
no
Dynamic Air Support:
no
Memory Foam:
no
No-Turn Design:
yes
Pocket Springs:
no
Pressure Risk:
high
Pressure Sensitive:
yes
Support Edge:
yes
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
Designed to conform to electric profiling beds, the Softform Premier Maxi Glide mattress not only provides exceptional pressure reduction and patient comfort but its patented design allows the top surface supporting the patient to remain in position when profiling. This significantly reduces the potential for shear and friction against patient tissue.
With sidewall support and non-flip (horizontal rotate only) facility, the mattress reduces the demand for manual handling and makes movement of the mattress easier when in use.
Covered in a PU, vapour permeable, two-way stretch cover that is waterproof and has welded seams, the foam core is protected by a fully enclosed zip. The zip facilitates easy access into the mattress interior for audit inspections.
Deep contoured insert pad for enhanced pressure area care; maximise body contact area and optimises pressure reduction
Top cover is fully detachable; aids inspection and allows easy removal for washing. Also facilitates a cost benefit of allowing the replacement of individual parts rather than the whole mattress
Warranty: foam 8 years, cover 4 years
Specifications:
Sizes:
long single, king single
Firmness:
medium
Height:
15cm
Weight:
16kg
Weight Capacity:
248kg
Features:
Comfort Layers:
no
Dynamic Air Support:
no
Memory Foam:
no
No-Turn Design:
yes
Pocket Springs:
no
Pressure Risk:
low, medium, high
Pressure Sensitive:
yes
Support Edge:
yes
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
CairMax is a the new range of hybrid pressure surfaces, delivering optimum comfort in the treatment and prevention of pressure injuries.
The CairMax Duo is a versatile foam air support surface with the ability to alternate between static or dynamic support, in response to the needs of the patient. Mattress functions as a static pressure relieving surface without the control unit, however when clinically required, can ‘step up’ to provide dynamic support with the control unit connected.
VersatilityMattress and control unit can be purchased as a system or separately. The compact control unit can be easily connected for immediate step-up to dynamic therapy when required, with no disruption to patient comfort.
SafetyNo concerns over correct pressure level settings with AutoCair automatic weight sensing technology, delivering fail safe patient comfort and support.
SimplicityThis ‘plug and play’ system is very simple to use and requires minimum training to operate, making it ideal for community or aged care use.
ComfortCombining durable foam core with alternating air cells embedded with castellated foam to deliver comfort and support for patients up to 230 kilograms. The castellated foam articulates when the mattress is profiled, while static head area foam offers stable support for enhanced sleep.
Specifications:
Sizes:
long single, king single
Firmness:
medium
Height:
18cm
Weight:
13, 16.8kg
Weight Capacity:
230kg
Features:
Comfort Layers:
yes
Dynamic Air Support:
yes
Memory Foam:
yes
No-Turn Design:
no
Pocket Springs:
no
Pressure Risk:
medium, high
Pressure Sensitive:
yes
Support Edge:
no
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
For those in the high-risk category for pressure injuries, the ProCair® Prime can be used as a fully alternating pressure mattress or easily converted to a hybrid foam mattress by adjusting the position of the built-in foam layer. It easily and quickly converts back into a dynamic mode when complete pressure off-loading is required. Easy to set up, the ProCair® Prime automatically adjusts the pressure to suit the weight of the patient and does not need a separate pump unit to hang from the bed - it is all built-in! This minimises trip hazards or damage from pumps being bumped off the bed and makes this all-in-one system easy and quick to move between beds. The Manual Fowler Boost mode adjusts the mattress pressure to provide increased support under the sacral area when the backrest is raised.
The ProCair® Prime Mattress Replacement System is equipped with an easy-to-use handset that can be operated by the user or the carer. Concerns over correct pressure level settings are eased with AutoCair, a cyclic automatic weight-sensing technology that automatically adjusts the pressure settings to keep the client within a safe pressure range for effective therapy, delivering fail-safe patient comfort and support. The inbuilt service indicator makes for worry-free maintenance. The Pro Cair Mattress Replacement System is an alternating pressure mattress especially suited for residential care facilities or home care environments. Designed for patients at risk of pressure injury, this provides a cost effective and feature rich solution for the prevention of pressure injury when used in conjunction with a comprehensive prevention strategy.
Designed to prevent and/or treat pressure ulcers for patients at medium to high risk
Feature rich mattress to replace standard mattress on hospital bed
Adjustable digital control unit with static transport function
12.5cm high alternating air cells
Three static head cells for optimal patient comfort
1 in 2 alternation cycle for pressure relief over a 12 minute cycle
Quick Twist CPR Valve
Vapour permeable, waterproof top cover with multi-stretch fabric to minimise friction and reduce shear
Maximum infection control including welded seams, antibacterial taping and full length waterfall skirt
Static head cells to add stability and reduce sleep disturbance
Fully adjustable digital control unit with eight comfort pressure settings; visible and audible alarm; timed transport and static functions for stable patient treatment
Specifications:
Sizes:
long single, king single
Firmness:
adjustable
Height:
20cm
Weight Capacity:
200kg
Waterlow:
20-25
Features:
Comfort Layers:
yes
Dynamic Air Support:
yes
Memory Foam:
no
No-Turn Design:
no
Pocket Springs:
no
Pressure Risk:
high
Pressure Sensitive:
yes
Support Edge:
no
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
Full Specifications Here
The Pro Cair Mattress Replacement System is an alternating pressure mattress especially suited for residential care facilities or home care environments. Designed for patients at risk of pressure injury, this provides a cost effective and feature rich solution for the prevention of pressure injury when used in conjunction with a comprehensive prevention strategy.
Designed to prevent and/or treat pressure ulcers for patients at medium-low risk
Feature rich mattress to replace standard mattress on hospital bed
Adjustable digital control unit with static transport function
12.5cm high alternating air cells
Three static head cells for optimal patient comfort
1 in 2 alternation cycle for pressure relief over a 12 minute cycle
Rapid release CPR tag for emergency deflation
Vapour permeable, waterproof top cover with multi stretch fabric to minimise friction and reduce shear
Maximum infection control including welded seams, antibacterial taping and full length waterfall skirt
Static head cells to add stability and reduce sleep disturbance
Fully adjustable digital control unit with eight comfort pressure settings; visible and audible alarm; timed transport and static functions for stable patient treatment
Specifications:
Sizes:
long single, king single
Firmness:
adjustable
Height:
18cm
Weight:
kg
Weight Capacity:
200kg
Waterlow:
20-25
Features:
Comfort Layers:
yes
Dynamic Air Support:
yes
Memory Foam:
no
No-Turn Design:
no
Pocket Springs:
no
Pressure Risk:
medium-low
Pressure Sensitive:
yes
Support Edge:
no
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
A full alternating pressure mattress replacement system for users at medium-high risk of pressure injury, the Pro Cair Plus offers superior functionality, enhanced comfort and optimum infection control. Increased cell depth makes the system well suited to the heavier patient. An effective pressure care solution when used in conjunction with a comprehensive pressure prevention strategy.
Designed to prevent and/or treat pressure ulcers for patients at medium-low risk
Feature rich mattres
Adjustable digital control unit with static transport function
20.3cm high alternating air cells
Three static head cells for optimal patient comfort
1 in 3 alternation cycle for pressure relief over a 12 minute cycle
Auto weight-sensing technology
Rapid release CPR tag for emergency deflation
Vapour permeable, waterproof top cover with multi stretch fabric to minimise friction and reduce shear
Maximum infection control including welded seams, antibacterial taping and full length waterfall skirt
Static head cells to add stability and reduce sleep disturbance
Fully adjustable digital control unit with eight comfort pressure settings; visible and audible alarm; timed transport and static functions for stable patient treatment
Specifications:
Sizes:
long single, king single
Firmness:
adjustable
Height:
20cm
Weight Capacity:
220kg
Waterlow:
20-25
Features:
Comfort Layers:
yes
Dynamic Air Support:
yes
Memory Foam:
no
No-Turn Design:
no
Pocket Springs:
no
Pressure Risk:
medium-high
Pressure Sensitive:
yes
Support Edge:
no
Temperature Regulation:
yes
Works with Adjustable Frames:
yes
